The image may differ from the original
RD30 flange connector from the Binder Series 694 with 12+PE terminals for front mounting. Solder connection, screw locking, IP65 protection rating. Unshielded version for permanent integration into equipment housing walls.
21 in stock
€ 12,87
| Series | Series 694 |
|---|---|
| Connection type | Soldering / Screwing |
| Lock | RD30 screw |
| IP rating | IP65 |
| Rated voltage | 400 V / 125 V |
| Rated current | 3–20 A |
| Temperature range | -40°C / +85°C |
The 99 0719 00 13 flange connector from the Binder Series 694 is specifically designed for front-panel mounting on enclosure walls, control cabinets or machine casings. With 12+PE pins and solder terminals, this RD30 Power connector binder provides a permanently installed high-current interface.
The flanged design allows for secure mechanical fixing using screws directly to the front panel or the housing wall. The solder terminal on the side of the unit ensures a secure electrical connection to the internal wiring or printed circuit board.
With an IP65 protection rating, the binder connector is protected against dust and water jets when it is correctly fitted and connected to the appropriate cable gland. The screw lock ensures that the connector is securely fastened in place.
Typical applications include control panels, drive cabinets, machine interfaces and anywhere else where a fixed connection with high-current capacity is required. Manufacturer: Binder (binder-connector.com). Compatible with RD30 cable sockets from the 694 series.
